## In Flashduty *** You can obtain an integration push URL through either of these two methods: ### Using Private Integration Choose this simpler option when you don't need to route alert events to different channels.

Expand

1. Go to the Flashduty console, select **Channel**, and enter a channel's details page 2. Select the **Integrations** tab, click **Add Integration** to enter the integration page 3. Choose **Huawei Cloud LTS** integration and click **Save** to generate a card 4. Click the generated card to view the **push URL**, copy it for later use, and you're Done

### Using Shared Integration Choose this option when you need to route alerts to different channels based on the alert event's payload information.

Expand

1. Go to the Flashduty console, select **Integration Center=>Alert Events** to enter the integration selection page 2. Select **Huawei Cloud LTS** integration: * **Integration Name**: Define a name for this integration 3. Configure the default route and select the corresponding channel (after the integration is created, you can go to `Route` to configure more routing rules) 4. Click **Save** and copy the newly generated **push URL** for later use 5. Done

## I. Huawei Cloud LTS Alert Push Configuration ### Step 1: Create Flashduty Alert Channel 1. Log in to your Huawei Cloud Console, search for `SMN` (Simple Message Notification) service and enter its console 2. Select `Topic Management=>Topics` from the left navigation bar 3. Click `Create Topic`, enter `Flashduty` as the topic name in the edit page and confirm drawing

4. Return to the topic list and click `Add Subscription` in the newly created Flashduty topic drawing

5. In the edit page, select `HTTPS` as the protocol, enter the **push URL** as the subscription endpoint and confirm drawing

6. After adding, check if the subscription status shows **Confirmed** in the subscription list drawing

### Step 2: Configure Log Alert Action Rules 1. Log in to your Huawei Cloud Console, search for `LTS` (Log Tank Service) and enter its console 2. Select `Log Alert=>Alert Action Rules=>Message Templates` from the left navigation bar and click `Create` drawing

3. In the template edit page, enter **Flashduty** as the name, select `English` as the message header language 4. Select `HTTP/HTTPS` as notification type and `JSON` as data type 5. Click `Confirm` to save drawing

6. Return to the `Alert Action Rules` list and click `Create` 7. Enter **Flashduty** as the rule name, select the previously created **Flashduty** topic and template drawing

### Step 3: Use the Action Rule Created in Step 2 in Alert Rules 1. Return to the `Alert Rules` list 2. Create or edit existing alert rules 3. Other configurations are omitted here 4. In `Advanced Settings`, check both `Alert Trigger` and `Alert Recovery` in notification scenarios 5. Enable action rules and select the **Flashduty** rule created in `Step 2` 6. Select `English` as language, click `Confirm` to save after configuration is complete drawing